No Products in the Cart
These metal lighters engrave crisp and clean. The black are powder coated so they work with co2 lasers no problem, silver and gold are for fiber lasers only. Basically it works by removing the powder coat and leaving the metal exposed. Lighters do not come with lighter fluid and are completely safe to laser engrave. Available with or without ,etal gift case.
Seal with shellac or Rustoleum to prevent rusting if used in a high moisture environment.
Recommended to engrave at a high dpi and power. You want to make sure you get the powder coat off completely. Use a sponge or cloth to wipe it down after and that will leave you with a clean metal shine. Be sure to dry immediately after wiping.
Glowforge recommendations: 400 speed, max power, 2 passes. Then use Acetone and a rag to clean it up.
